 |
|
 |
Module / Subassemblies for the foodstuffs industry,
of 1.4435 / 1.4404 (1.4301)
| Operating pressure: |
-1 / 10 bar |
|
|
Module / Subassemblies for the foodstuffs industry, of 1.4435 / 1.4401
| Operating pressure: |
-1 / 10 bar |
|
| |
|
|
 |
|
 |
Oxigen purifier plant of 1.4571 / 1.4878
Consist of:
- Adsorber- and catalyser module
(asdorber, catalyser, separator, flow heater)
- Frame, piping
- Valves, controls and instruments,
process measuring and controltechnology
- Electrical installation, isolation
- Nitrogen pressure test
| Operating pressure: |
16 bar |
| Operating temperatur: |
550 °C |
Design and manufacture according to Manufacture License of Special Equipment People's Republic of China.
|
|
Fluid bed drier for the chemical industry of 1.4301
| Pre-pressure abs.: |
1 bar |
| Explosion pressure abs.: |
10 bar |
| Calculation pressure: |
6 bar |
| Max. wall temperature: |
80 °C |
|
| |
|
|
 |
|
 |
Roto-Spheronizer
| Material product side: |
1.4404 / 1.4435 |
| Material remaining parts: |
1.4301 / 1.4307 |
| Ferrite content basic materials: |
< 1.0 % |
| Ferrite content welding seams: |
< 5.0 % |
| Operation pressure: |
1.0 bar |
| Pressure surge: |
10.0 bar |
| Designe pressure |
6.0 bar |
| Max. temperature: |
80 °C |
| Surface product side: |
Completely polished, whole surface electro-polishes
Ra 0.1 - 0.3 |
| Surface remaining parts: |
Completely polished Ra 0.6 |
|
|
Cuve Aerosol Chamber
| Material: |
1.4301 |
| Max. pressure: |
-0 / 0.3 bar |
| Max. temperature: |
-90 / +100 °C |
| Test pressure: |
0.3 bar |
| Vessel-Ø: |
3,000 mm |
| Overall height: |
4,495 mm |
| Jacket thickness: |
6 mm |
| Surface: |
Outside raw, inside polished,
Ra < 0.4 and afterwards electro polished |
|
| |
|
|